1968 Barracuda Notch - Plano, TX

Working through all the issues...

Antenna is installed, radio is on order.

Engine is sitting on the K-Frame, steering box is installed. Pilot bearing and flywheel installed.

Schumaker headers do not clear the steering box as is, CPPA 2" not even close.

Bellhousing is not concentric to the flywheel. Offset dowel pins on order... want to get the engine and trans situated in the car with the radiator and then work out the accessory drive, the headers, the fan... I want to get the transmission aligned, sort out the throw out bearing depth, and install the clutch assembly. After the clutch is in I will attach the transmission to the bell housing and the whole assembly can be slid under the car.

Making headers for this is going to be an interesting exersize as well. I may buy the RobbMC starter to get some more room.