Slant 6 Turbo 68Dart Project
I threw in the towel before i got that far Jr. and as it turns out, the head gasket is...
just fine.
Took me about an hour and 45 minutes to get the turbo apart, and get the head off. I discovered the exhaust leak under the turbo flange when I took it all apart, and a couple little oil drips so I will have fixed quite a few things.
Started here, and none of the rods were bent or anything, so I pulled the head off.
The fiancee helped me wrangle it out of the car too luckily.
I don't see any issue with the head gasket itself, this is cylinder 1/2 (from right to left)
This is 3/4
This is 5/6
On the head, this is 4/5/6 (left to right)
And this is 1/2/3
I don't see any surface cracks or abnormalities, but I think I'll take it back to the machinest tomorrow and have him check. I could not be able to see the crack and my dad believes it to be behind a exhaust valve or something.
Unless someone else sees something I don't?
I threw in the towel before i got that far Jr. and as it turns out, the head gasket is...
just fine.
Took me about an hour and 45 minutes to get the turbo apart, and get the head off. I discovered the exhaust leak under the turbo flange when I took it all apart, and a couple little oil drips so I will have fixed quite a few things.
Started here, and none of the rods were bent or anything, so I pulled the head off.
The fiancee helped me wrangle it out of the car too luckily.
I don't see any issue with the head gasket itself, this is cylinder 1/2 (from right to left)
This is 3/4
This is 5/6
On the head, this is 4/5/6 (left to right)
And this is 1/2/3
I don't see any surface cracks or abnormalities, but I think I'll take it back to the machinest tomorrow and have him check. I could not be able to see the crack and my dad believes it to be behind a exhaust valve or something.
Unless someone else sees something I don't?