1965 Dodge Dart Charger

65 Dartman said

Really! I don't remember that! If you have a junk glove box, cut it open and grind the rivets off from the back side. That leaves the correct rivet head. Use a couple dabs of epoxy to hold the maintenance record to the glove box door then do the same for the correct rivets. People do the same thing when re-attaching a dash VIN plate to the dash.

Click to expand...

Don! Thanks for the lead. I did exactly what you said. I found one glove box door and cut it apart. After that in took off the rivets from the plate and then applayed some epoxy to hold the card in place and the rivets. I must admit that I had never thought of that!

Talking about the card there seems to be two styles.I checked with my other 65s and the one with blue boxes seems to be the right one. The other one might be the older style.

Next step was to break one pin off the Dartcharger emblem and grind off some material so the badge was flat. Then double side tejp and added some epoxy.

And finally added the glove box door handle that I bought from you. Now it starts to look like a Dartcharger.