1968 SS Dart in progress

Well, I am making steady progress each weekend with final assembly. Lots of new parts going in along with plenty of fabrication of new brackets. Pictured are the freshly painted aluminum radiator, new A/C condenser, and new B&M plate transmission cooler. For brackets I just used some 1" strap, took my time, and made sure my spacing allows for proper airflow and clearance of mounting hardware. I also installed the new Trans-Dapt 2" aluminum spacer, Russell -6 fuel log, notched the gaskets, and installed the new PRP Mopar throttle cable bracket, and the MSD blaster 2 coil and bracket. Looks like the 21" cable won't be long enough so I have a 24.25" unit coming from Mancini racing. A good deal at only $26.00. Limited spacing between the radiator and water pump pulley necessitates the use of a small spacer and flex fan set up. New AN fittings on order with Summit to finish up fuel plumbing from mechanical pump to carb. Also installed the overflow tank at inside front of drivers side fender. We are going to try and have it ready for Mopars at the strip :burnout:.