Swapped out to Electric, now no spark... :(

So I read the "Fool-proof tips to fix any NO-SPARK issue" and read numerous other threads on here, but it is still not working....

Here is the back ground....

I swapped out to the mopar electronic ignition on a 65 Barracuda with a 360 V8, and now I am not getting any spark from the coil. Using power testers and a multi-meter, I do have power at both ends of the coil, and power at the ballast resistor on both ends when in the start position and one side when in the run position. I have ground at the ECU as well. I did a search here on the forums and doubled checked the air gap to .008 on the reluctor, but now I am lost.


Any suggestions is greatly appreciated!

Thanks