wagon pics added........painting roll cages

Alright, here's the wagon.


View attachment IMG_4543.jpg

View attachment IMG_4542.jpg


Its a 410 cubic inch with ported Edelbrock RPM Performers. It has a solid flat tappet with around .589 and .605 inch lift. Don't remember the cam specs to the "T". I have them wrote down in the shop. Has a port matched Air Gap and 1.6 Harland Sharp roller rockers. Transmission is a 999 with an aftermarket 2.74 first gear. Turbo action 3800 stall converter with an auburn locker and 3.73 gears in the 8 3/4 rear end. Has frame connectors welded up through the floor, and a 12 gallon fuel cell and battery mounted in the spare tire well. All of it is under the hinged floor in the back, under the tailgate.

Has 28x10.5 Mickey Thompson ET Street Radials on the rear and skinnies on the front. Has Caltracs and Calvert shocks all the way around. the car weighs 3420lbs with me in it.

I drive it everywhere. Have driven it to the track and ran low 7.30's lots of times. The best it has ever been was 7.302 and it spun the tire off the line just a bit due to poor track prep that night. Had the track been prepped better I feel that it would have went in the 7.26 to 7.29 range.