Bad Day...Smoked something...didn't get high!

Damn sorry about your luck. When I rewired my car. It had a section in the instructions for how to check for current draw.

To do this. You will need a test light.

Start by turning off all accessories. Place the ignition switch in the off position and close the doors to make sure the dome light is off. Now connect the Positive Battery cable. Before connecting the Negative cable. you should check for current draw. This can be done easily with a test light connected between the negative battery post and the negative battery cable. No light = no draw. If you have a no draw or just a really dim light, it is safe to connect the negative battery cable and start checking the system.

I copied this out of the manual. Its to late this time, but its a safe way to check for next time. Hope this helps and good luck