1967 Cuda FB project

Well, I didn't feel like giving Wilwood a butload of money for aluminum hubs. So I found some hubs from the Challenger project and took some measurements to see if I could make them work. They have the same size inner bearing but the outer one was bigger on the ID. Used a Mustang II outer bearing. The distance between the bearings was also 1/2" closer on the Modified spindle I bought.
I decided to cut off the rotor part of the Chally spindle and cut the inner bearing surface 1/2" deeper and also remove 1/2" of the back of the spindle.
Walla!!!!!! A couple hours of my "free" time and I have useable hubs. Will order 12" rotors tomorrow and will then be able to make brackets for the Viper brake calipers.:blob:
View attachment WP_20150323_004.jpg
View attachment WP_20150323_017.jpg
View attachment WP_20150323_018.jpg
On the car!!! Soon to have wheels and sitting on the ground!!!:cheers:
View attachment WP_20150323_016.jpg