1970 Swinger 340 Hemi Orange 4 speed

mejackg said

Problem is finding a donor car to section that piece with. The Northeast is awful on cars. You cant find these cars around here anymore. The ones that are solid enough that these areas wouldnt be toast, are way to nice to cut up. My parts car is good for some pieces but not the rockers! I've been trying to find someone willing to sell me some from down south or out west, but no such luck.

As for the rest of the rockers, they are very solid. But I dont like the idea of putting an acid inside an area where i cant make sure its all the way clean again. I was planning on using Eastwood's Internal Frame Coating on these. It converts the rust, then seals it from further damage.

Click to expand...

I know what you mean.. Cars up here are all usually rusted really bad! I have been buying used parts from California. Lee Robinson parts out a lot of a bodies and he would be worth PMing on here to see if he can help you.

Evaporust is water based and non toxic! You should pick some up and try it.. You'll be amazed. It won't touch any paints or coatings and will never eat any bare metal if left soaked for however long. I have a few gallons of it and soak a lot of misc parts like bolts and door mechanisms and they come out like new. I pumped it thru my old torsion bar crossmember with a pond sump before I found out my frame rails were rotten and it cleaned it to bare shiny metal where the blaster couldn't get. I still plan on pumping it thru my rear frame rails once it's on the rotisserie because I have no other way of cleaning the rust out of them.