1970 Swinger 340 Hemi Orange 4 speed
I got a lot done on the cowl today. I removed the upper cowl, ground down the spotwelds, sanded the lower cowl area and removed the surface rust from the baffles. I just put a coat of epoxy on the lower cowl area and hopefully tomorrow I can re seam seal the baffles and paint some Hemi Orange on it! This week I should be able to glue/weld the upper cowl on.
Nice and clean! I was worried there'd be rust in this area.. It had a lot of compacted dirt and sandblasting sand in this area tho! It'll be a peace of mind painting and sealing in here so no water will leak in the car.
In the process of stripping the rust/paint off in the lower cowl.
Test fit... Fits perfect!
Epoxied!
I got a lot done on the cowl today. I removed the upper cowl, ground down the spotwelds, sanded the lower cowl area and removed the surface rust from the baffles. I just put a coat of epoxy on the lower cowl area and hopefully tomorrow I can re seam seal the baffles and paint some Hemi Orange on it! This week I should be able to glue/weld the upper cowl on.
Nice and clean! I was worried there'd be rust in this area.. It had a lot of compacted dirt and sandblasting sand in this area tho! It'll be a peace of mind painting and sealing in here so no water will leak in the car.
In the process of stripping the rust/paint off in the lower cowl.
Test fit... Fits perfect!
Epoxied!
