Wilwood conversion problem

Thanks for all the feedback gentlemen. Bottom line is: (1) Wilwood's specs/advertising stuff was at best misleading; (2) Wilwood was not sympathetic; (3) I'm not going to try to turn down the Wilwood hub snout; (4) I can tell you 100% that the 14" wheels I have do not fit the Wilwood hub - period - the center hole is simply too small in diameter; (5) this is particularly maddening since (as 72bluNblu noted, the Wilwood hub comes with stud holes for both a 5 x 4 and 5 x 4.5 bolt pattern); (6) I'm probably better off anyway with 15" rims and 5 x 4.5 bolt pattern; (7) I am going to take it up with Wilwood at some point, but I'm going to keep the kit and go get some new wheels (in the market now for Cragars or black Torque Thrusts). The toughest pill to swallow will be new tires - didn't want to take on that expense given what I already have.

That all having been said, I am now looking to sell my original wheel/tire set. So here's what I've got (photos below): fronts are Fuzion HRI 195/60R14's, rears are Goodyear Eagle ST 235/60R14, all 4 wheels are 14 x 6 SBP blacked out rallyes with beauty rings (driver condition), rears have acorn style center caps, fronts have snout style, all 4 have 3 5/8" backspacing, and I think 1 15/16 offset (difficult to figure out). I also have 2 extra Fuzions currently mounted on spare rims (same size) - one of the extra wheels is mangled, the other in good condition. Anyone in the market? Any ideas on price I should be asking?