360 flex plate & torque converter options

Hi fellas. Sorry not trying to hijack the thread but I also have the same question.

I also recently had a shop put in a rebuilt 360 and attached it to my A904. I just now had the weights fall off of the torque converter....they used the old torque converter that was used on my previous 318 and just welded the weights on....so I'm looking to replace it and the flex plate with something stronger. My engine is pretty much stock with the exception of aluminum edelbrock RPM performer heads and a Mopar performance air gap intake. I'm not too experienced with this but I have done a little research and know that the torque converter should be weighted with 2 60 gram weights (well that's what I've found so far).

So with that said, could anyone recommend good torque converter and flex plate for me?

I was looking at these:

Boss Hogg Torque converter - weighted
http://www.summitracing.com/parts/ape-53082

B&m flex plate
http://www.summitracing.com/parts/bmm-10239

Or this torque converter. It's not weighted but the manufacturer will build one with weights for me.

http://www.summitracing.com/parts/hup-27-20

Thanks in advance!!