70 Duster T5 Swap

I ran 275/60 Nitto drag radials behind a NWC (non world class) T5 in my fox that made 300/295 wheel NA (NWC T5's are rated for 200ft/lb @the crank)- held the power fine -

1. make sure there is NO play in the input shaft - I mean 0 play with the bearing retainer installed

2. a good shifter - I had a Hurst pro billet on mine Pro5.0 is another good one

3. this is the important part don't grind or power shift the trans - let the linkage do the work and it will hold up just fine

Nice work! this makes me want to do this to my Demon and rock 4.10's.. with a 3350 though not a T5 ahaha