Any one interested in the oiling mods I did?

I restricted all five cam bearings because my cam has full grooved journals on number 2&4.
Not coincidentally my number 2&4 main bearings were showing signs of oil starvation.
Number 4 was the worst having lost it crush.
On my new x block stroker build I have restricted all five cam bearings to 1/8 inch and completely shut off the rocker oiling from the cam bearings.
I instead have run a crossover tube to feed the rockers directly from the main galley and all added the front oil mod to eliminate the #4 main starvation caused by velocity in the galley.
See pic.

Duane