Looking for a cam for 360

I forgot to mention. A really good target Dcr is between 8 and 9. Iron heads with heavy loading, should run on the low side to run 87 to 91 octane gas. Aluminum headed lightly loaded cars can run closer to 9Dcr, perhaps even on midgrade 91 gas.
I run 87E10 at 8.6Dcr in my 366/Eddie headed,3600 lb(me included),68 FormulaS clone, at about 750ft altitude,with no issues. Ive run it, at up to 9.2Dcr,(corrected to 9.0@ 750ft) on 91E10, and running 87 on low load settings(cruising).

So with a 50* event and a true 8.5Static, you would be at 7.5Dcr.A little on the low side,to be sure but do-able.If your true Static is closer to 8, then a 40*event, might be better. This is now a different cam.

The trick is the cam. Reference post#17