SRT8CUDA Build

Also fabricated a relay panel which I'll install inside the cold air intake box (with suitable rain protection) This takes most of the load off the bulkhead connector
On the panel I've mounted:
- a daylight running module which will power the front turnsignal lamps (LED) . (Daniel Stern Lighting)
- 2 relays for the fans
- 2 relays for high and low beam headlamps (Daniel Stern Lighting)
- a relay for the AC clutch

I made a new wiring harness for the headlights using 12 Ga wire and the ceramic headlight connectors from Dan Stern. The headlights are Cibie with H4 70/65 W lamps.