View attachment 1714773399
View attachment 1714773404
I bought a 1967 Barracuda off eBay with the back brakes very neglected. The rivets on one of the brake shoes had become exposed and badly gored the rear drum. My rear brakes are 10 x 1-3/4 with a SBP. After ordering the wrong drum twice, I decided to do more careful investigation.
I discovered from this site that those drums were no longer made. A couple of guys know these are rare and are charging about $240 on eBay and Amazon. Most of the parts houses listed a Centric premium drum, Model 122.63044, that looked correct. But nobody had them.
So I looked up Centrics phone number and called them in Southern California. I was going to tell them there was a demand for these drums, and they should make some more -- it doesnt hurt to ask. The drums are actually made in China. The lady that answered the phone said that drum was no longer made, but they have replaced by a standard drum, C-tek #123.63044. They had them in stock.
I told her that none of the distributors even knew about this drum, and what could I do? She ask my zip code and gave me the phone number of a Fast Undercar shop (a West Coast franchise) in Fresno. I called the guy on Wednesday and picked up two drums on Thursday. Cost was $69 + tax (each) and I didnt need to pay any shipping.
There is a major communications gap between Centric and all the parts suppliers. An email from RockAuto said that Centric had not furnished them that part number, and they couldnt special order them -- go figure. If you cant get your supplier to furnish these, have them call Centric and use that part number. Or call Centric yourself at 800-758-3004 and ask for a supplier in your area.
Do NOT assume there is an infinite source of these drums. If you need them, get them soon.
I waited to post this before I actually confirmed they fit on the car. They do fit -- tight as a drum.