No spark Mopar dizzy and FBO box & coil

67Dart273 said

You are going to have to re-phrase this because what you typed makes it sound like "there is no problem."

Do you mean you replaced the pickup and now have spark?

Do you mean you did this test and have PROPER nice, loud, snappy spark(s) as the engine rotates?

If so "it should run"

Explain exactly what you did and "what you saw."

Click to expand...

I pulled coil wire off the dizzy, unplugged yellow wire to starter relay so motor is not turning. Had wife turn key to start, held coil wire to ground and I have spark there. So coil is working. I then unplugged the 2 wire pick up connector off the dizzy, had my wife hold key to start, grounded both sides of the plug and have spark there also. So I have power to the dizzy pick up from the ECU, power from the coil to the dizzy cap through the coil wire, but no spark at plug wires. Sound right? Pickup is bad? The pickup also ohmed low and could not get an ac volt reading while cranking it over.