Slant 6 Turbo 68Dart Project
A new part from Mishimoto arrived, and a few parts i ordered to hook it up. I am going for another sandwich adapter, this one is much better built, and I have a solution worked up for the stove pipe on the pump to not be in the way, while still retaining the pipe. Before I had to bore out the adapter, and that made it weaker than it already was and the adapter literally pulled apart from the oil pressure.
I am doing this setup with pushloc and I can see that the 6feet I got is not enough. This has to get to the bottom of the radiator support frame.
I was kind of hoping the radiator would show up today. I'm not doing this addition till the radiator comes. It will all be done in the same go.
Today I may try and hook the HEI up also.
A new part from Mishimoto arrived, and a few parts i ordered to hook it up. I am going for another sandwich adapter, this one is much better built, and I have a solution worked up for the stove pipe on the pump to not be in the way, while still retaining the pipe. Before I had to bore out the adapter, and that made it weaker than it already was and the adapter literally pulled apart from the oil pressure.
I am doing this setup with pushloc and I can see that the 6feet I got is not enough. This has to get to the bottom of the radiator support frame.
I was kind of hoping the radiator would show up today. I'm not doing this addition till the radiator comes. It will all be done in the same go.
Today I may try and hook the HEI up also.