SRT8CUDA Build

I've been working with David Page at FAST to get everything calibrated on my setup. I had looked on the internet to find the flow rate on my injectors and found several different numbers, but I used 30 lb/hr that seemed to be the correct number. David strongly suggested getting the injectors flow tested to be sure. I took one to a local shop and it flowed 90 cc in 15 secs which works out to 34.28 lb/hr at 58 psi.
So I had the wrong flow rate in the XFI box.

These are the stock 2010 6.1 L SRT8 hemi injectors p/n 05037479AA