Aussie VC 67 Dodge ute
also been playing with the sound system.....the amps are to be mounted behind the seats on the rear wall....it's going to have a mono block amp for the sub and a 4 channel amp to run the front splits as an active system...that is, each front speaker will have it's own channel so each can be tuned from the head unit, all comp stuff....anyway the amps will have custom made fibreglass bridges between them so it looks like one large amp right across the cabin
in the back ground is the mono block amp....the alloy piece in the middle is one of the end sections I removed to get the shape for my end sections for the bridges...the pine blocks are the 4 ends that form the bridge ends
the pine forms have been mounted to a frame and foam blocks will be sanded to shape to fibreglass over
sanded to final shape ready to glass
2 layers of 450 gsm glass
as the rear wall hasn't been welded into the cabin I had the chance to mount it together on the bench....testing the lighting effects, they like that sort of **** in audio comps!!
doing a test fit in place as the bridges will need a bit of a bog up to fit exactly ready to be covered in black vinyl to match in with the colour of the amps...the lights will be able to be switched off for normal use...they're just for extra points in the comps
also been playing with the sound system.....the amps are to be mounted behind the seats on the rear wall....it's going to have a mono block amp for the sub and a 4 channel amp to run the front splits as an active system...that is, each front speaker will have it's own channel so each can be tuned from the head unit, all comp stuff....anyway the amps will have custom made fibreglass bridges between them so it looks like one large amp right across the cabin
in the back ground is the mono block amp....the alloy piece in the middle is one of the end sections I removed to get the shape for my end sections for the bridges...the pine blocks are the 4 ends that form the bridge ends
the pine forms have been mounted to a frame and foam blocks will be sanded to shape to fibreglass over
sanded to final shape ready to glass
2 layers of 450 gsm glass
as the rear wall hasn't been welded into the cabin I had the chance to mount it together on the bench....testing the lighting effects, they like that sort of **** in audio comps!!
doing a test fit in place as the bridges will need a bit of a bog up to fit exactly ready to be covered in black vinyl to match in with the colour of the amps...the lights will be able to be switched off for normal use...they're just for extra points in the comps
