Magnum swap starts, does not run
Okay, here's how I've done the PCM wiring.
Battery, cavity 3 red wire is hot all the time.
Ignition Acc feed, cavity 9, light blue is hot when the key is on.
All the wires listed as ground are grounded. Except "sensor grounds" which go to the sensors.
All the cavities with plus marks next to them I cut out.
Okay, here's how I've done the PCM wiring.
Battery, cavity 3 red wire is hot all the time.
Ignition Acc feed, cavity 9, light blue is hot when the key is on.
All the wires listed as ground are grounded. Except "sensor grounds" which go to the sensors.
All the cavities with plus marks next to them I cut out.