Im stumped...

1. remove #1 spark plug. 2. put thumb over plug hole. 3.rotate motor by hand until you feel thumb pressure and timing marks align. 4.with dizzy removed, verify intermediate gear slot is facing front to back. 5. Slot in dizzy should point the same way as gear and should correspond to #1 on dizzy cap. 6. install dizzy clamping it firm but no tight. 7. Verify firing order 1-8-4-3-6-5-7-2 in counter clockwise manner. 8. verify juice to coil. 9. should start. 10. after star t and warm, use timing light. Good luck