Hyd Roller cam

OK I'm looking for a long snout roller cam to upgrade a 300HP Magnum crate motor. Current cam @050 205/196. lift 420/420 and is done at 5k rpm.

I spoke with bullet cams about regrind, approx 2 week turn around.
Figured I'd post a wanted ad and see if someone had a good performance roller cam laying around that they were not going to use.

My budget combo street/strip setup.
67 dart 2 dr post 3000 lbs
360 magnum 300hp crate mopar magnum upgraded springs installed.
M1 dual plane, Demon 750DP, 1 5/8 long tube headers with cutouts.
904 low gear set, TF2 shift kit, /6 convertor Dacco, 3.91 8.75 SG 27" tire

A cam around 220 or 230 @50 should do it.