AlV 69 Dodge GTS project
Our Fuel system has arrived and is installed. :)
The fuel system was upgraded to 3/8ths unit from Finelines. Again these bends were perfect.
I also picked up a 3/8ths stainless sending unit and cleaned then painted the filler and vent tube. Got 30% off on the 3/8 sending unit and new fuel tank from YearOne, but the sending unit pickup tube is bottomed out preventing the flange from sitting flush. every thing fit after massaging the bends a little.
I needed a little extra umph to turn the lock ring so I picked up this wrench from home depot that worked like a champ.
Here is a view from the trunk. I think it came out good. OH! and you'll notice I installed the trunk weather seal. The only problem with the seal is that it lifts the trunk lid a little. I don't understand why because it's really soft. But that for another time.
And the underside
I'm calling M and H to see how long the harness will be want to keep the momentum going. :)
Getting the fuel system in gets us one step closer to the road :)
We are still waiting for the Rear harness from M and H.