Clutch fork won't clip back in.

Ok, so just an update, and thanks everyone for helping me out.
I put a spirit level on the torque tube and raised the motor on the drivers side so it was dead level. This improved my clearance a bit but the z bar was still hitting. I removed z bar and took a small notch out and also bent the lower arm in slightly. I also made a clutch pedal stop bolt and adjusted my rods to suit. This gave me a little more clearance down at the starter end of the z bar, so now it's not hitting on the release. :)

I had all these bits out last night when I was talking with Wayne and they all looked fine and he verified I had the correct bits. I emailed him a bunch of pics and we went through them individually.

I reinstalled all the bits today and the clutch feels so much better,still firm, but nowhere near as hard as it previously was.
I still need to check clearance between pp and disc, just waiting for my stepson to get home from work so he can keep the clutch in and I can check it.