wierd turn signal problem!!

Replaced the cam thing on the turn sig switch on the Fury a few months ago because the cancel tabs were broken off - had a very similar issue after putting it all back together only to discover the new cam piece was the problem. The contact wires On the back side of the new cam were not making contact with the terminals in the turn sig switch for the right side. I had brake lights on both sides until I used the right signal - then would lose the right rear completely. I also had the right rear turn sig as long as I didn't touch the brake. One would work without the other.....Took it back out and had to bend the contact wires out some to make contact in the switch.....