Anyone run a Mopar .557 cam in a 383?

As per "Victory Library"

296° Mechanical: P4120661
Duration Intake Nominal 296° Duration Exhaust Nominal 296°
Duration Intake @ .050” 252° Duration Exhaust @ .050” 252°
Intake Lobe Centerline 108° ATDC Exhaust Lobe Centerline 112° BTDC
Lobe Separation Angle 110° Overlap 76°
Intake Opens 40° BTDC Exhaust Opens 80° BBDC
Intake Closes 76° ABDC Exhaust Closes 36° ATDC
Intake Lift .557" Exhaust Lift .557"
Note: as installed on 108° centerline per Chrysler

Rumble sez...
RPM range of 3500-7000? I guess. The 383 is a short stroke engine. Not much more stroke to it vs. the 273/318/340 crank. 3.31 vs 3.38?

In the Mopar engines book, this cam in a Duster equipped with an 8-1/4 & 4.30 years ran in the low 11's IIRC. The engine was a 9.0-1/400.
Click here and scroll down to a post by "383man" about his sons car and this cam. http://board.moparts.org/ubbthreads/ubbthreads.php/ubb/showflat/Number/5153974/site_id/1