What Cup Push Rod

OH, here we are. I guess I have the same setup except re-ground cam. Not together yet Do the 302 heads have the large pushrod holes? Otherwise you will have to re-work them.

I have a couple of extra 273 flat tappet solid lifter pushrods. What I'm hoping to do is to "burn" one of them to make a checking pr, and hopefully shorten my own. I have a lathe, so hoping to turn down the PR on one end (probably the cup because you can "get ahold" of them" to release the end and clean it up. They are pressed in and either staked or spot welded. Then shorten the tube and press them back together.

I should get busy "down there" and see if I can "do one" of them.