1966 Dodge Dart
View attachment DSCN4271.jpg
Started on the fuel system this week and this was my first thought. When I was thinking this thru I called summit and they recommended keeping some rubber hose between each piece however it looked terrible and didnt fit in very well. So tonight I changed course and ended up going this way.
View attachment DSCN4277.jpg
View attachment DSCN4281.jpg
I think this is much cleaner although I used a brass nipple in between the 2 parts. It raised it up higher and I plan on cutting a hole in the spare tire drop so I can put the pump about an inch into the trunk. This will allow another inch or 1 1/4" of ground clearance. The rearend housing is about 7 3/4" clearance and the pump will be just about 10". Should work out ok. Here are the pics and you can see as it sits I can go up just over an inch higher.
View attachment DSCN4282.jpg
View attachment DSCN4289.jpg
View attachment DSCN4284.jpg
View attachment DSCN4298.jpg
Hope now I can start running the gas line to the front and back from the regulator to the return fitting.
Thanks for checking out the progress.
Rod