'68 318 to carbed Magnum 5.2: Check my checklist
There isn't. The shroud is roughly 1/4" taller than the tanks on the radiator. When sitting level with the radiator, it touches both the inlet and outlet port.
The fan sits too deep in the M-body shroud anyway, and would probably introduce turbulence behind the blades as well. The repop E-body shroud should work.
-Kurt
I find it hard to believe that there is not enough clearance to do this to the hose.
There isn't. The shroud is roughly 1/4" taller than the tanks on the radiator. When sitting level with the radiator, it touches both the inlet and outlet port.
The fan sits too deep in the M-body shroud anyway, and would probably introduce turbulence behind the blades as well. The repop E-body shroud should work.
-Kurt