Susie R/T
thanks everyone!! and yes the shipping crate surprised me too lol.
I also found there is a difference in the crossmember between auto and 4 speed. So after doing some homework I found the two are the same EXCEPT the auto has a box section welded to the front of it and the center is not open to allow for the mount to mount in the 4 speed location.
from underneath you can see where the mount would be located in either case. The same mount itself is used just the location changes according to what transmission.
from the top it shows the area needed to be cut open. The mount will mount through this window for the 4 speed location
the front box section for the auto location must come off or it will interfere with the four speed.
so far I got the front box section cut off and that is all I got this early morning.....more to come on this
thanks everyone!! and yes the shipping crate surprised me too lol.
I also found there is a difference in the crossmember between auto and 4 speed. So after doing some homework I found the two are the same EXCEPT the auto has a box section welded to the front of it and the center is not open to allow for the mount to mount in the 4 speed location.
from underneath you can see where the mount would be located in either case. The same mount itself is used just the location changes according to what transmission.
from the top it shows the area needed to be cut open. The mount will mount through this window for the 4 speed location
the front box section for the auto location must come off or it will interfere with the four speed.
so far I got the front box section cut off and that is all I got this early morning.....more to come on this
