Pro Touring 10K

Not a lot of time to do much on my car today. But I have been ask about the threaded rod and how that works. So Here is a visual. The rod will run from the box I have tacked in place to the holes on the other box to make sure they are square to one another. Another thing to note is the rear rails turn in and are not level where the new box will mount. here are some pictures of the stock rail for the mounting point of the new box and the one I have squared up and tacked in place. Doing this will keep the front eye from binding allowing the rear slider to work in a linear line. not to bind the slider and let it do its job.