engine combination

just wondering if cubic inches and compression ratio is enough to support the cylinder heads I'm buying. alright I have a 360/380 hp mopar crate engine in my 67 dart. I took it to the drag strip and it ran 13.28 and I was hoping for more, I know with some tuning I might have gotten a little more but probably high 12's at the most so of course I want more, was going to supercharge (still might later) it but decided to change heads and cam instead. I bought edelbrock performer rpm and going to take them to modern cylinder head for a full cnc port job and replacing the cam. the camshaft I'm thinking of going with is a comp cams hydraulic roller with 236 and 242 duration @.050 an .544 and .541 lift with 1.5 rockers but I'm going to be using 1.6 rockers so the lift will be close to .600. just wondering what you think of the cam selection and if 360 cubic inches and 9.0:1 compression will work ok with those heads (the heads on the engine now are 62cc and the edelbrocks are 58cc so I should have a little more compression). what do you think?