'68 318 to carbed Magnum 5.2: Check my checklist

Well, this does explain something:

I just installed a set of 8 brand-new Sealed Power lifters - oiling hole up - on the driver's side, then reinstalled the spider and the pushrods. Cranked the engine.

No oil to any of the driver's side rockers. Nothing. And they're not pumping up. In the meantime, the passenger's side has no shortage of oil to the rockers; it's a geyser.

Restriction in the line? Spun cam bearing?

I'm probably going to pull all the lifters and the spark plugs tomorrow, and spin the engine without the lifters. See if oil gets through the lifter bores at all.

-Kurt