spindle question

honested said
I got the 68 spidles of today and compaired them to the 64 valiant spindles and the balljoint alighnment is very different it looks like the 68 spindles are going to through the caster way off it may have enough adjustment in the eccentrics on the upper control arms just asking to see if any one has done this before

What you are seeing is the spindle arm on a 9 inch is at 90 degrees and the 10 inch is straight. This is ok and will not throw the caster out because if you were to locate the centerline on both they are the same even though they are cast to look different.