You can see pictures of the 518 install in my photo gallery here on FABO. There's a link under my avatar.
The converter is a PTC 9.5 inch 4000 stall. Best converter I've ever had by far.
The OD is activated by supplying 12 volts to the terminal plug for it on the trans. Anytime there is juice there and the trans is in 3rd gear, it goes right to OD. I kept it simple and use a toggle switch on the dashboard to control it.
The cam is a COMP Xtreme Energy XR292R-10 street solid roller .582/.588 lift, 254/260 duration@ .050 lift and it has a 110 degree lobe separation. Its installed straight up.
I could pick up more power by going with more lift on the cam because my heads flow considerably more up around .650-.700 lift but I stayed conservative with it to avoid valvetrain issues and excessive maintenance.
Thanks for the compliment!