65 Barracuda w/500ci RB, Stage VI Max Wedge Port Heads, 6-speed, and 5.38 Dana
Here is everything almost fully prepped, at least the passenger side is, mocked up and also the pieces I cut off the inside of the tubs. I was going to try to cut them and reuse them to fill the open areas at the front and rear, but they aren't flat so it would have been difficult to work with them so I tossed them to the side. In the last couple pictures, you can see how I cut notches from the original body plug access holes and the 2" holes I drilled with my new hole saw 15-piece Bi-metal Hole Saw Kit for accessing the body plugs after the tubs are moved in.
Here is everything almost fully prepped, at least the passenger side is, mocked up and also the pieces I cut off the inside of the tubs. I was going to try to cut them and reuse them to fill the open areas at the front and rear, but they aren't flat so it would have been difficult to work with them so I tossed them to the side. In the last couple pictures, you can see how I cut notches from the original body plug access holes and the 2" holes I drilled with my new hole saw 15-piece Bi-metal Hole Saw Kit for accessing the body plugs after the tubs are moved in.