Oem battery cables

You can make one yourself.

Go to Napa and get a 48" red top post battery cable with one offshoot.

then get some 10 ga wire and hook that up for the smaller wire from the starter to the starter relay.

Then make another wire from the small offshoot from the battery terminal to the other post on the starter relay.

Now you have a functional positive cable for under $30...

If you want to get fancy, carefully remove the heat shield and grommet from the old cable and install it on the new one in the same place.

We used the 45" one, but it could use a few more inches for better routing/fit.

View attachment Batt Cable A01 B.jpg

View attachment Batt Cable A13 B.jpg

View attachment Batt Cable A15 B.jpg

Here's where I installed the heat shield and grommet.

View attachment Batt Cable A24 B.jpg

View attachment Batt Cable A23 B.jpg


I will put the fittings for the starter relay on when I get the engine compartment to that stage... That way they will be fit properly....