COP Ignition Development

Here is a wiring diagram example for the COP ignition on a SBM. The wiring has more coils, but is very similar to a regular ignition hookup. The ECU is mounted on the drivers side inner fender well. There are many ways to route the wiring. The route shown minimizes wire lengths, and provides good noise immunity, the disadvantage is it is not pretty. Others may have a much better ideas than me, to make the system pretty.

The red wire going to the coils is common for all, the gray is not, eight separate, one for each coil. The coils will likely mount on an aluminum channel, with short plug wires.

I have parts on order to build a couple prototypes. I will be building one next week.
View attachment COPwire.jpg