Official 3rd Gen Hemi thread

I went off of an old article in a magazine. Don't remember which one though. I think they used a stock small block lower hose and the upper was from a new 300C or something like that. The lower hose was the right shape (though a bit long), but the diameter on the pump side was a little small. I stretched it with a tail pipe expander and it seems to still be working okay. The upper hose was a pretty close fit on its own, though I think a tad long again. Granted I'm using a truck front cover and old C body radiator (or so I've been told) with passenger side lower port and driver side upper. The car front covers have both ports on the passenger side I think?