Dougs 67 Notch build
I completed the installation of my Crackedback headlight relay kit and the circuit breakers from the alternator and to the dash. I wired the alternator feed to the starter relay through a 40A breaker and tied the feeds to the headlight relays to the down side of that relay. The down side of the alternator breaker also goes to the starter relay. Another feed from the starter realy supplies the up side of a 30A circuit breaker which supplies the parallel wires feeding the dash cluster. I installed the headlight relays under the battery tray and installed my battery kill switch. I fabbed up a #4 cu ground cable with a #10 pigtail which is attached to the switched side of the kill switch and the pigtail terminating at the auxillary ground bus shown. I did modify Rob's kit to fit my needs by running all his grounding to my auxillary bus and getting rid of the trigger spade connectors and hard wiring them. Got the console in tonight and will be wiring the GV controller and posting those photos up next.
Cheers all---DRO:)
View attachment WiringA.jpg
View attachment WiringB.jpg
View attachment WiringC.jpg
I completed the installation of my Crackedback headlight relay kit and the circuit breakers from the alternator and to the dash. I wired the alternator feed to the starter relay through a 40A breaker and tied the feeds to the headlight relays to the down side of that relay. The down side of the alternator breaker also goes to the starter relay. Another feed from the starter realy supplies the up side of a 30A circuit breaker which supplies the parallel wires feeding the dash cluster. I installed the headlight relays under the battery tray and installed my battery kill switch. I fabbed up a #4 cu ground cable with a #10 pigtail which is attached to the switched side of the kill switch and the pigtail terminating at the auxillary ground bus shown. I did modify Rob's kit to fit my needs by running all his grounding to my auxillary bus and getting rid of the trigger spade connectors and hard wiring them. Got the console in tonight and will be wiring the GV controller and posting those photos up next.
Cheers all---DRO:)
View attachment WiringA.jpg
View attachment WiringB.jpg
View attachment WiringC.jpg