Old Man's 66 Cuda Funnycar build

Removed the back glass by my self , it's heavy . For now just looking how to do tin work after tubs go and get every thing to fit in place . installed factory side pieces , will try to tie these together and make a solid panel across the back of the car .

View attachment IMG_2125.jpg
Placed a wood strip across from side to side to give me a visual of where the tin work will go if attached to the stock trim pieces

View attachment IMG_2128.jpg
Will set tubs at 4 inches over the tires for now and see what it looks like , I like to look at things and see what I can come up with on how to do the tin work

View attachment IMG_2129.jpg
I am looking at running the 3 inch exhaust over the rear end and over the shock support bracket , there is 8 inches of room in the pic . come over the shock mount turn straight down with the exhaust do a couple of 90's and go over the frame and tie into the mufflers .

View attachment IMG_2132.jpg
Flowmaster mufflers are 5x12x22 for big block RV . Build a 71 chevy truck for a friend ,he has a 560 inch bb in it , used these mufflers sounded great real deep and mellow with little back pressure ...

View attachment IMG_2126.jpg
Will have to look at how much room I have left for 20 gallon fuel cell starting to get tight back there ...