67-up auto console,shifter location pics
Years ago Redfish on here had a template, I believe
Don't know if these will help, as I removed mine for a Cheetah. Part of the rear bracket is there, the one that bends and folds over "to the left" on the floor at the rear corner of the bracket. In one photo you can see the weld from the front right side bracket by the front bolt for the Cheetah
In the photo below the tape at 28" to the rear bracket is laid straight across from the standing seam at the door sill
Below, the start of the tape intersects a line if you would lay a straightedge across the front bucket seat mounting holes. This amounts to 12" to the front edge of the front bracket, and 16" as shown to the console ears. The rear edge of the left rear bracket is about 6"
Years ago Redfish on here had a template, I believe
Don't know if these will help, as I removed mine for a Cheetah. Part of the rear bracket is there, the one that bends and folds over "to the left" on the floor at the rear corner of the bracket. In one photo you can see the weld from the front right side bracket by the front bolt for the Cheetah
In the photo below the tape at 28" to the rear bracket is laid straight across from the standing seam at the door sill
Below, the start of the tape intersects a line if you would lay a straightedge across the front bucket seat mounting holes. This amounts to 12" to the front edge of the front bracket, and 16" as shown to the console ears. The rear edge of the left rear bracket is about 6"