fuel pump wiring woes
..............The EZ fuse block has dedicated wire for the fuel pump. Today I accidentally touched this wire to the battery junction block and the engine turned over..
you may have to enlist local help. I'm only guessing. Sounds like you fed power TO that wire, by touching the junction block, and the "other end" somehow engergized the starter.
Might be something you did, or a wiring mistake
One thing I REALLY dislike about most ALL the aftermarket stuff regardles of brand is that the do NOT have a good complete diagram of what the harness "really is" and how it interfaces with the fuse panel. I set down with mine and traced every single wire. Some of them were repurposed,..........such as power windows, and some were re-wired at the fuse panel to be on with "only ignition" or with ACC , etc.
What you need to do is figure out what that wire is and where it goes, .....in the harness
and secondly, figure out "how" you hooked it so to run the starter.
Can you post a link to the EZ destructions, and specifically "which wire" you are referring to?
