fuel pump wiring woes

Well, thanks for the quick responses. I'm not really asking for help on the wiring, I already have the car wired and it starts. What prompted my question was the wire that came out of the EZ wire fuse block labeled "fuel pump" that I inadvertently touched to the positive lead from the battery and the car turned over. I am concerned because as 67Dart273 alluded I may have a shorted wire in the fuse box because that fuel pump wire should not be activating the start circuit. 67Dart273 there is no good instruction from EZ on line. They have minimalist manual which is not worth much. If I had it to do over again wouldn't use EZ Wire. KitCarlson, I am overly verbose, but am to old to change. nm9stheham, thanks for that info but I'm pretty sure the relay is wired right. I'm guessing now that because of the screwy voltage on the EZ wire harness that's the problem. I can apply 12v direct to the pump relay circuit and get the pump to run. It's how I got fuel to start up initially. I guess that I will have to go through the EZ fuse block wire by wire. Again, thanks all for the help.