Need a 727 Pump to Clutch Selective Washer!!!!!!

fishy68 said

I've never seen anything thicker than a .102"... The .102 will cut it back to about .041" end play. Did you shim up the rear planetary gearset? If it has excessive slop that'll loosen things up. I've ran into some 727's in the past that I couldn't get tighter than .035" with everything shimmed as tight as I could get it.

Click to expand...

Not yet, there are a few .010" planetary shims in the kit I bought. This is going in a spare BB transmission so I had it all apart to clean and inspect. Very little wear on this 1964 bb pushbutton tranny, but the endplay is too much for my tastes. Bands are real good, didn't dig into the clutch packs yet. I will update when I get the kit. Thanks.