SRT8CUDA Build

Have spent many days getting all the windows aligned with the top. Plus trying to figure out all the adjustments on the top. Man, this is complicated!!
I then hung both front fenders and started to get all the gaps aligned. Then found I had to pull in the front of the pass door a bit to get a good alignment between the fender and the hood.
This should be pretty straightforward - just loosen the hinge bolts on the door and push it in a bit, but it wouldn't move!! Then I saw that the edge of the hinge was hitting the inside of the door. (Which means it was never right from the factory)
Off comes the hinge to do some grinding. I have to reassemble everything so hope this will work out OK.
Of course this means re-aligning the pass door window with the convertible top seal!!!