AlV 69 Dodge GTS project

Figuring to improve the performance of my headlights for driving at night while also reducing the amount of amps running through the bulkhead and light switch I Spent time installing headlight relays.

I picked up the components on line and then wired it to fit my application. Staying with my theme of keeping a stock appearance I made a bracket (using some flat steel I had laying around) to mount the relays on the radiator support and painted it black to hide it..

This setup uses the existing light plug on the harness to energize the hi/Lo relay meaning almost no amp draw through the bulkhead or light switch. The headlights draw directly from the battery via a fused primary feed which is tied to the feed for the MSD controller. I soldered all of the connections and terminals then used shrink tube to cover it all.

As I was running through a system check I ran into a problem with the wipers and radio. The wiper won't oscillate and the radio won't tune. frown emoticon
I'll keep plugging away.