Old Man's 66 Cuda Funnycar build

View attachment IMG_2156.jpg
finished up square tubing on tub's lower edge . Sealed inside of tub with black paintable sealer. Will paint inside and spray on undercoating later .

View attachment IMG_2157.jpg
Built outside frame work , this will hold up tin work and muffler from the bottom . Also support for trunk mounted battery .

View attachment IMG_2158.jpg
Frame work is level from front to back and squared off the main frame

View attachment IMG_2159.jpg
Level from side to side

View attachment IMG_2160.jpg
Cut piece of 20 guage sheet metal and rolled beads in it for strength ... tin always has a small wave in it when you use a bead roller . when installed I use black sealer in between frame and tin work and then use pop rivets to hold in place

View attachment IMG_2161.jpg
This is looking from under the frame work , The exhaust tip will exit between the frame and outer sheet metal ....as you can see I have a lot of cleaning to do before I finish and seal up this area .....